Basic Third

by Pretty Plastic · Netherlands · PLA1522 · Published 18 Nov 2026
About this material

Large-format facade and roof tile with a vertical relief, made from 100% recycled rigid PVC from construction waste.

Basic Third is a large-format cladding tile pressed from 100% recycled rigid PVC. The raw material is construction waste, such as old window frames, gutters and downpipes. Each tile has a vertical relief and a marbled surface, so no two look quite the same.

Rows of green and terracotta tiles with vertical ribs, partly installed on timber battens
Basic Third during installation. Photo: Marcel IJzerman, courtesy of Pretty Plastic

At 569 × 329 × 30 mm and 2.5 kg, it is the largest tile by Dutch maker Pretty Plastic: 6.7 tiles cover a square metre. The tiles hang on horizontal timber battens by a tab on the back. One screw at the bottom right fixes three overlapping tiles, which makes installation quick and lets the facade be taken apart again. Tiles can be laid in a standard bond or an uneven stretcher bond.

Single green tile with a marbled surface and two vertical ribs
Basic Third in green. Image: Pretty Plastic

Basic Third is classified B-s3,d0 for reaction to fire and is validated for buildings up to 35 metres. It suits ventilated facades and roofs with a pitch of 15 to 90 degrees. Colours are green, terracotta, grey and ochre, each in a light, medium and dark shade. Its first application is Plus Ultra III, a timber laboratory building in Wageningen. In November 2026, the tile won surface design of the year at the Dezeen Awards.

Office building with a facade of recycled PVC tiles behind autumn trees
Plus Ultra III, Wageningen. Photo: Marcel van der Burg, courtesy of Pretty Plastic

Pretty Plastic’s earlier Second High tile and original Pretty Plastic tile are also on MaterialDistrict.

Material properties

Keywords