Search
46 results for “coating” in materials
- ARA-LT laser filmARA-LT laser film is a method to transfer a PVD layer onto a product. It consists of a base material, a transparent PET film. The carrier film is provided with a PVD coating ("physical vapor deposition"). With a standard marking laser, the PVD layer can be transferred from the carrier film onto the product surface in a standard atmosphere, to apply a high-quality and abrasion-resistant coating.
- SuperblackSuperblack coatings and foils are made to absorb as much light as possible with a minimum of light reflection. These 3 sheets (Metal Velvet, Spectral Black and Maxi Black) all differ in terms of spectral absorption and application.
- IPCThe I.P.C. is a 2-components 100% solids elastomeric polyurethane coating system. It is both extremely durable and resistant to extreme mechanical loads and chemical exposure, and therefore ideal for protective coating, to improve hygiene, or to provide waterproofing. It is used for coating metal, wood, concrete, fiberglass and many other surfaces.
- SuperThermA ceramic based, water-borne, insulating coating, designed to block heat load, moisture penetration, and air infiltration over a surface and to reduce energy costs. The material, developed by Nasa, reflects over 95% of the three radiation sources from the sun (UV, visual light and IR-rays). Energy savings up to 20-70%.
- Alpha TactoAlpha Tacto is a water-borne, low odour, low solvent, coloured soft touch effect coating for interiors. A cloudy effect is achieved with a highly tactile soft-touch feel and is available in 33 colours. Either a suede or a textile effect may be obtained using this material.
- Effect VarnishThese effect varnishes enables one to create special effects, without special tools. Several effects are available: e.g. Multiscope Raindropeffect, Ice-Crack effect and flex Craquele effect.
- Kepla-coatKEPLA-COAT® is a white colored, plasma chemical coating that improves aluminium and titanium alloys. The coating has high corrosion resistance and excellent abrasion resistance. KEPLA-COAT® Black can be used to coat all commonly used aluminium- and titanium-based materials. The coating has high light absorption and increases the heat conductivity. The coatings consist of a series of oxide ceramic layers of different porosity densities which tune the coating to specific physical properties.
- Jotun powder coatingJotun developed various powder coatings for (engineered) wood that preserve the natural beauty of wood, are environmentally responsible, and commercially efficient. Ultra Lite protects the beauty of natural wood furniture. Primax Excel is a one-coat powder coating primer solution for MDF and HDF. Ultra One is a one-coat powder coating to give engineered wood a premium finish.
- Powder coatings Abcite® & Plascoat®Thermoplastic Powder coatings Abcite® and Plascoat®. A proven reliable coating solution for the most demanding environments. Coatings for parts and components used in demanding…
- Magoxid-coatThe MAGOXID-COAT® layer is a crystalline oxide ceramic with a high content of extremely resistant compounds such as spinels, e.g. MgAl204. The plasma-chemical process produces oxide ceramic layers, which, in addition to providing a high level of protection against wear and corrosion, also meets other requirements such as hardness, uniform layer formation, fatigue strength, dimensional accuracy and temperature load capacity.
- Soft-Touch CoatingsSoft-Touch Coatings enhance products with a velvety and nice-to-touch surface. The coating can be applied on any paintable substrate. The intensity of effects can be varied and exceptional optical and haptical effects can be obtained. The coating itself is transparent and can be combined with other coloured or non-coloured coatings.
- Graphical Facade CoatingGraphical Facade Coating is a coating method to allow for a variety of design and coatings on various materials and surfaces. The base coat and façade paint are applied normally and the graphic design is sprayed onto the surface.
- Circular Coated FabricsThe presented material is a replacement of the traditional fossil-based coating with poly(lactic acid), a biobased plastic that is chemically recyclable. The objective was to demonstrate, within one year, the technical feasibility of a PLA-coated film that can be converted after use into high-quality raw materials through an environmentally friendly recycling route (alcoholysis).
- META-COATMETA-COAT is a Nickel-Phosphorous layer on plastic base components in order to improve temperature resistance, wear resistance, chemical resistance and solderability. Because of the application process of the metal coating, the composition can be varied. The final properties also depend on the original base material.
- ECI Ceramic CoatingECI Ceramic Coating is an environmentally friendly water based polymer roof and wall coating. This solar reflective coating reflects solar light and prevents heat conduction.
- HT coating for ceramic tilesThe HT coating for ceramic tiles is based on the photocatalytic properties of titanium dioxide as a catalyst, which effects a reaction between light, oxy-gen and air humidity. The coating is baked onto the glaze at high temperature in-plant.
- Powder CoatingAllicance powder coating is a green manufacturing process. There are no VOC’s (Volatile Organic Compounds) nor HAP’s (Hazardous Air Pollutants) emitted through this process. In most instances the paint over spray can be reclaimed and reused, which can mean a transfer efficiency or paint usage greater than 95%.
- Glow-in-the-dark coatingsWaterproof breathable glow-in-the-dark coatings for most woven fabric types such as nylons and polyesters.
- Soft Feel CoatingSoft Feel coating can transform hard surfaces into a texture that feels like velvet, silk or rubber. It consist of a grade two component urethane finish that can be applied as a clear translucent topcoat over a wide variety of substrates and basecoats to produce a full matte finish.
- Hydrophobic & Oleophobic CoatingsThese coating materials are specifically developed so it can bond with many different surfaces. It works on a nano-scale and creates an easy-clean, anti-smudge surface.
- Plant-Based Wood CoatingsSherwin-Williams offers a full range of wood coatings with plant-based materials for industrial applications. The wood coatings contain up to 40% plant-based ingredients.
- PVD coatingThe company Daumet offers a bespoke gold PVD coating service on a wide range of materials, including leather, wood, silk, textiles, and carbon fibre, to personalise luxury products. Specialised in white gold, the company developed different processes with gold from 24 to 18 karats. The processes substitute two critical raw materials, palladium and rhodium, by a much more abundant element: tungsten.
- Coated AluminiumEuramax paints aluminium on coil for roof and wall cladding. Coil coating is also known as "pre-painting". Approximately 65% of all metal cladding is painted using this process. All paint PE, HDPE, PUR-PA and PVDF can be applied up to four layers. All the paints are suitable for exterior use.
- Grandezza Seamless Metal-Effect CoatingThe Grandezza product line by Volimea offers a seamless filler solution designed to create metallic-effect surfaces for a wide range of interior applications. Suitable for walls, fireplaces, bathtubs, and furniture, this decorative coating brings a distinctive lustre and sense of exclusivity to any surface, establishing itself as a refined alternative to traditional wall finishes.
